Popular spare parts for Graduate lathes
The Home of Graduate
Woodturning Lathes
| Part No. | Description | £ (Sterling) |
||
| Spindle Assembly |
|
|||
| JL-323 | Main spindle | 213.00 |
||
| JL-6010/6208 | Main spindle | bearings (pair) | 46.00 |
|
| JL-327 | Outboard bearing | carrier | 60.00 |
|
| JL-1710 | Vee belt | 17.25 |
||
| JL-324 | Main pulley 4 step * | 150.00 |
||
| Motors & Drive | ||||
| JL-73 | 4 step pulley * | Imperial (5/8") | Bore | 63.25 |
| JL-73E | 4 step pulley * | Metric (19mm) | Bore | 63.25 |
| JL-B56/750 | Motor (imperial) | 1 phase 240v | 5/8" shaft | 220.00 |
| JL-80G4 | Motor (Metric) | 1 phase 240v | 19mm shaft | 186.00 |
| JL-321/1b/2 | Turn buckle | Assembly | 51.75 |
|
| JL320a | Eccentric cam | 51.75 |
||
| Electrical | ||||
JL-C12 (OEM part) |
Contactor/starter | with overload 240 | volt single phase | 57.50 |
JL-D12k |
Stop/Start button | panel (complete) | 40.25 |
|
| JL-3BR | Micro switch | top Lid or motor | door | (each) 25.00 |
| Tailstock | (centre lathe) | |||
| JL-333 | Tailstock body | (casting) | 150.00 |
|
| JL-133a | Spindle | 75.00 |
||
| JL-135a | Hand wheel | 75.00 |
||
| L2A-58 | Retaining key | 15.00 |
||
| L2A-60 | Eccentric shaft | 25.00 |
||
| JL-300 | Locking lever | 15.00 |
||
| L6-7-41 | Stop pin | 7.50 |
||
| L2A-66 | Eye bolt | 15.00 |
||
| L2A-48 | Clamp plate | 10.00 |
||
| JL-298 | Thumb screw | 11.50 |
||
| Tee Rest Base | (centre lathe) | |||
| JL-334 | Complete assy | (not inc tee rest) | 207.00 |
|
| JL-392/3a | Nipping stud | (l/hand thread) | 17.50 |
|
| Outboard turning | ||||
| JL-311a | Curved arm | 103.00 |
||
| JL-315a | Centre pin | 51.75 |
||
JL-28 |
Locking lever |
(inc ball knob) |
|
31.63 |
| JL-316 | Large washer | 8.63 |
||
| JL-392/3 | Nipping stud | (r/hand tread) | 17.50 |
|
| Short Bed | ||||
| JL-423a | Short bed casting | (fully machined) | 374.00 |
|
| JL-311b | Tailstock assy | (complete) | 287.00 |
|
| JL-298 | Thumb screw | 11.50 |
||
| JL-6 | Short bed | (Full assembly) | 595.00 |
This is a selection of 'Popular' spares but we can supply most parts for Graduate Lathes
please click on one of the links below for exploded drawings and full parts listings
and email for prices and availability
Items marked * are of limited supply and subject to availability
Prices ex works carriage/postage extra
NOTE; Tailstock, Tee Rest base, Outboard and Short bed are available as complete
assemblies at a discounted rate please ask for prices